| All measurements are made at 120V / 240V //50Hz / 60Hz |
| Amplifier section |
| |
| Clipping point of the preamplifier is set to a level where total harmonic distortion (THD) is 0.2% |
| Input Impedance (Fixed) |
330 kohm |
| Output Impedance (20 Hz-20kHz) |
< 0,009 Ohm |
| Frequency response (DC - 65 kHz) |
- 0.4 dB |
| Input level for rated output |
1 V RMS |
| Max. peak current |
> 150 A |
| THD(measured at 1 kHzhalf power,8W) |
< 0,001 % |
| THD (measured at 1 kHz -1 dB, 8 W) |
< 0,0015 % |
Noise
(measured with bothinputsshorted) |
400 Hz - 30 kHz : 150 µV
DC - 30 kHz : 200 µV |
| Damping factor (20 Hz - 20 kHz) |
> 850 |
| |
|
| |
|
| Rated output power |
|
| |
| 8 ohms |
600 W |
| 4 ohms |
1200 W |
| |
|
| Power consumption (no load or signal) |
230 W |
| |
|
| The NEMO is DC coupled from input to output |
| |
|
| Dimensions |
|
| Width |
465 mm / 18.3 inches |
| Depth |
450 mm / 17.7 inches |
| Height |
288 mm / 11.3 inches |
| Weight |
41 kg. / 90.2 lbs. |
English
Français
Deutsch
.png)